Roller Clutch Release (throwout) for 1275 Spridgets 海外 即決
商品説明・詳細
送料・お届け
商品情報
商品説明 商品名 Roller Clutch Release (throwout) for 1275 Spridgets(Roller Clutch Release (throwout) for 1275 Spridgets) 商品画像一覧 商品説明 ※アメリカの現地出品者により作成されたため、英語のまま掲載いたしております。 A new roller release bearing for the clutch system on your 1275 Austin Healy Sprite or MG Midget. The advantages of the roller bearing over the stock carbon bearing are that friction is reduced, no wear means the clutch action never changes, and greater life. It is made from all new components. The roller bearing itself is from a modern Japanese car and can run for a hundred thousand miles without any problem. The body is from a new 948 carbon release bearing with the carbon removed. The adapter is machined from 6160 aluminum. The distance from the back of the mounting pegs to the front of the bearing is the same as a stock 1275 carbon bearing so it will fit a stock setup with no changes. See picture of a stock 1275 carbon bearing compared to the roller bearing. The assembly is held in the clutch release arm with the old style circular springs as in the stock 948 clutch assembly. The ends of the mounting pegs have small holes for the spring which is then rotated around the finger to lock it in place. If you want to use the later style thin metal clips, you will have to slightly relieve the inside of the fingers as the roller bearing assembly fits snugly in the fingers of the release arm. I have used this type of roller bearing in my SCCA HP race car for six seasons with no problems at all. The bearing still rolls smoothly with no play in the mechanism. A friend is now using one in his HP/Vintage Sprite racecar. Cost: $90. Domestic shipping is via USPS Priority Mail Flat Rate Padded Envelope at $8.65. Shipping weight is 1 pound, 3 ounces. International buyers, contact me for shipping rates and please be aware that customs charges may apply. I will ship the next business day after receiving payment. Please contact me with questions. 落札時の注意事項/良くあるご質問 【お支払いについて】 弊社ショップでは、クレジットカード決済またはPayPay残高払いのみ対応しております。 万が一、お支払いの確認ができない場合には、購入のご意思が無いものとして、お取り引きをキャンセルとする場合がございます。予めご了承ください。 【送料について】 ヤフオク!セカイモン店で落札いただいた商品は、全て送料無料でお届けしております。 落札金額以外にお支払いいただく費用はございませんので、ご安心くださいませ。 【お届け先のご住所について】 ヤフオク!セカイモン店で落札いただいた商品は、個人使用を前提として商品の通関を行っております。 東京税関の指導により、個人輸入の配送先はお客様(輸入者)のご自宅住所1か所で、個人の氏名に限定されております。 よって商品の配送先は、個人の住所を登録してください。住所が会社や法人、団体などの場合は商用とみなされ、通関できない恐れがあります。 そのため、配送先が個人の自宅住所以外になる場合は、購入はお控えください。 【お取り引きのキャンセルについて】 落札成立後、出品者とのお取引が開始しているのでキャンセルはできません。 商品情報を十分にご確認いただいたうえで、商品を落札いただけますようお願いいたします。
商品説明 商品名 Roller Clutch Release (throwout) for 1275 Spridgets(Roller Clutch Release (throwout) for 1275 Spridgets) 商品画像一覧 商品説明 ※アメリカの現地出品者により作成されたため、英語のまま掲載いたしております。 A new roller release bearing for the clutch system on your 1275 Austin Healy Sprite or MG Midget. The advantages of the roller bearing over the stock carbon bearing are that friction is reduced, no wear means the clutch action never changes, and greater life. It is made from all new components. The roller bearing itself is from a modern Japanese car and can run for a hundred thousand miles without any problem. The body is from a new 948 carbon release bearing with the carbon removed. The adapter is machined from 6160 aluminum. The distance from the back of the mounting pegs to the front of the bearing is the same as a stock 1275 carbon bearing so it will fit a stock setup with no changes. See picture of a stock 1275 carbon bearing compared to the roller bearing. The assembly is held in the clutch release arm with the old style circular springs as in the stock 948 clutch assembly. The ends of the mounting pegs have small holes for the spring which is then rotated around the finger to lock it in place. If you want to use the later style thin metal clips, you will have to slightly relieve the inside of the fingers as the roller bearing assembly fits snugly in the fingers of the release arm. I have used this type of roller bearing in my SCCA HP race car for six seasons with no problems at all. The bearing still rolls smoothly with no play in the mechanism. A friend is now using one in his HP/Vintage Sprite racecar. Cost: $90. Domestic shipping is via USPS Priority Mail Flat Rate Padded Envelope at $8.65. Shipping weight is 1 pound, 3 ounces. International buyers, contact me for shipping rates and please be aware that customs charges may apply. I will ship the next business day after receiving payment. Please contact me with questions. 落札時の注意事項/良くあるご質問 【お支払いについて】 弊社ショップでは、クレジットカード決済またはPayPay残高払いのみ対応しております。 万が一、お支払いの確認ができない場合には、購入のご意思が無いものとして、お取り引きをキャンセルとする場合がございます。予めご了承ください。 【送料について】 ヤフオク!セカイモン店で落札いただいた商品は、全て送料無料でお届けしております。 落札金額以外にお支払いいただく費用はございませんので、ご安心くださいませ。 【お届け先のご住所について】 ヤフオク!セカイモン店で落札いただいた商品は、個人使用を前提として商品の通関を行っております。 東京税関の指導により、個人輸入の配送先はお客様(輸入者)のご自宅住所1か所で、個人の氏名に限定されております。 よって商品の配送先は、個人の住所を登録してください。住所が会社や法人、団体などの場合は商用とみなされ、通関できない恐れがあります。 そのため、配送先が個人の自宅住所以外になる場合は、購入はお控えください。 【お取り引きのキャンセルについて】 落札成立後、出品者とのお取引が開始しているのでキャンセルはできません。 商品情報を十分にご確認いただいたうえで、商品を落札いただけますようお願いいたします。